Demore Exterior Solutions serves Bainbridge homeowners with professional exterior contracting services — roofing, siding, windows, doors, and gutters. We are fully licensed, insured, and intimately familiar with Bainbridge's local building department requirements, delivering work that meets and consistently exceeds every applicable code and standard.
Licensed & Insured
Ohio Contractor
Code Compliant
Exceeds ORC Standards
Permitted Work
Every Project
Free Inspections
No-Obligation Estimates
We know what Bainbridge's building department requires — and we go further.
Permit Required?
Yes — Local Building Department (county jurisdiction)
Local Code Notes
Ohio Residential Code (ORC Chapter 3781) applies. Permits pulled for all applicable work. Ice & water shield required per OBC.
Ohio State Code Compliance (ORC 3781 / OBC)
Ice & water shield minimum 24" past interior wall line at eaves
Drip edge required at eaves and rakes (IRC R905.2.8.5)
Maximum 2 layers of shingles before full tear-off required
Class A fire-rated shingles required in all Ohio jurisdictions
Closed valley or open valley flashing per manufacturer spec
All penetrations flashed and sealed per OBC Section R903
How We Exceed These Standards
Demore Exterior Solutions doesn't stop at minimum compliance. We extend ice & water shield to 36" past wall lines, install hidden hangers every 18" on gutters (vs the 24" standard), and conduct a final QC inspection before scheduling the building department sign-off. Your home gets contractor-grade protection, not the bare minimum.
Expert shingle and storm-damage roofing — fully permitted and code-compliant.
Bainbridge homeowners trust Demore Exterior Solutions for roof replacements, storm damage repairs, and new construction roofing. Every project is permitted through the local building department and installed to manufacturer specifications that maintain your full warranty.
Free Inspection & Documentation
We conduct a thorough roof inspection documenting all damage, wear, and code deficiencies. Photos and measurements are provided for your records and insurance carrier.
Permit Procurement
We pull all required permits from your local building department before any work begins. No shortcuts — ever.
Full Tear-Off (When Required)
Old roofing is removed down to decking when required by code or condition. We never layer over compromised roofs.
Deck Inspection & Repair
Every board is inspected. Rotted or damaged decking is replaced with OSB or plywood per IRC Table R803.2.
Ice & Water Shield Installation
Applied a minimum of 24" past the interior wall line at eaves and in all valleys — exceeding most local minimums.
Synthetic Underlayment
Premium synthetic felt (minimum 15# equivalent) installed over entire deck for secondary moisture protection.
Drip Edge Installation
Galvanized or aluminum drip edge installed at eaves and rakes per IRC R905.2.8.5.
Shingle Installation
Class A fire-rated, manufacturer-certified shingles installed per manufacturer specs for full warranty validity. Nail pattern and exposure verified.
Flashing & Penetrations
All pipe boots, chimneys, skylights, and wall flashings are sealed with compatible flashing materials and caulked with elastomeric sealant.
Final Inspection & Cleanup
Magnetic sweep of entire property. Final walkthrough with homeowner. Building department inspection arranged and passed.
Bainbridge averages 50+ inches of snowfall annually — proper ice & water shield is critical
A properly installed roof can last 25–50 years in Northeast Ohio's climate
Incorrect nail placement voids most shingle manufacturer warranties
We carry full liability and workers' comp — protecting you from liability
Vinyl, fiber cement, and engineered wood siding — installed to last.
Whether you're upgrading aging siding, repairing storm damage, or improving your Bainbridge home's curb appeal and energy efficiency, Demore Exterior Solutions delivers a watertight, code-compliant installation with every product we offer.
Inspection & Code Review
Full exterior inspection identifying moisture damage, failed flashing, and code deficiencies specific to your municipality.
Permit Procurement
We pull all required permits — siding replacement over certain thresholds requires permits in most Northeast Ohio jurisdictions.
Removal & Disposal
Existing siding removed and disposed of properly. All lead paint protocols followed for pre-1978 homes.
Water-Resistive Barrier (WRB)
House wrap or felt paper installed per IRC R703.2. All seams taped and flashed at all openings.
Flashing Installation
Pan flashing, window head flashing, and kick-out flashing installed at all critical junctions.
Siding Installation
Vinyl, fiber cement, or engineered wood installed per manufacturer specs — nail hem, overlap, and expansion gaps all verified.
Trim & Finishing
J-channel, corner posts, utility trim, and starter strips installed plumb and level. No gaps, no shortcuts.
Caulking & Sealing
All penetrations, corners, and trim intersections sealed with premium paintable caulk rated for exterior use.
Final Inspection & Cleanup
Property cleaned, debris removed. Homeowner walkthrough and building inspection coordinated.
New siding can improve home energy efficiency by up to 20%
Fiber cement siding carries a Class A fire rating and is impact-resistant
Proper water-resistive barriers prevent costly moisture damage behind siding
Bainbridge HOA or historic district requirements are always reviewed before work begins
Seamless aluminum gutters sized and sloped for Northeast Ohio rainfall.
Properly functioning gutters protect your Bainbridge home's foundation, landscaping, and siding from water intrusion. Our seamless gutters are fabricated on-site for a perfect fit with no leak-prone seams.
Property Assessment
We measure roof area, calculate drainage needs, and identify optimal downspout placement to meet or exceed local stormwater runoff requirements.
Old Gutter Removal
Existing gutters and downspouts removed and recycled. Fascia board inspected for rot and repaired as needed.
Fascia Preparation
All fascia and soffit areas cleaned, primed if needed, and confirmed structurally sound before attachment.
Seamless Gutter Fabrication
Gutters fabricated on-site to exact measurements. No seams in run lengths — eliminates the #1 source of gutter leaks.
Hanger Installation
Heavy-duty hidden hangers installed every 24" (we install every 18" — exceeding standards) ensuring long-term slope integrity.
Gutter Installation & Slope
Gutters hung with proper 1/16" per foot slope toward downspouts for complete drainage. Verified with level.
Downspout Installation
Downspouts sized and positioned to handle peak flow. Extensions placed to direct water away from foundation per local grading requirements.
Gutter Guard Installation (Optional)
Micro-mesh or solid cover gutter guards installed when requested — reducing maintenance and preventing clogging.
Water Test & Inspection
System flushed with water to verify slope, flow, and leak-free connections. Homeowner walkthrough completed.
Northeast Ohio receives 38+ inches of precipitation annually — gutters are critical
Seamless gutters reduce leak points by 90% vs sectional systems
Clogged or failing gutters are a leading cause of foundation damage
We install hangers every 18" — 25% more support than industry standard
Bainbridge is located in Geauga County, Northeast Ohio — a region characterized by variable weather patterns including heavy lake-effect snowfall, spring hail storms, and humid summers that place significant demands on residential roofing and exterior systems.
Our team is experienced working with the local contractors, building inspectors, and material suppliers throughout Geauga County, ensuring smooth permitting and inspections on every project.
Demore Exterior Solutions has served Northeast Ohio homeowners for years and understands the unique construction styles, HOA considerations, and neighborhood characteristics found throughout Bainbridge.
Same Day
Response Time
Free
Estimate Cost
Geauga County
Service Area
10+ Years
Experience